- Reusable respirator for spray painting, brush and roller painting, orbital and manual sanding
- A2 protection against organic gases and vapours such as solvent based paint, adhesive and cleaning detergents*
- P3 protection against high level fine dusts and oil or water based mists*
- Quick latch mechanism provides easy, one-hand drop-down of face piece without removing head straps. Convenient for moving in and out of contaminated areas and during break times or conversation
- Enhanced breathability and reduced resistance provided by twin inhalation valves and large filters, compared to single filter masks
- Economical, easy maintenance, simple to handle and lightweight
- Easy filter change with bayonet filter fixing system for a wide range of filters
- Resuable: can be used with particulate filters, gas and vapour cartridges or combination cartridges and be replaced with new filter when needed
- Tested and approved to comply with European standards – CE Mark 0086 (6052QL Mask EN 140:1998) (6055 Filters EN 14387:2004+A1:2008 A2) (5935 Filters EN 143:2000 P3 R)
- Users must be trained and have read all user instructions. Misuse may cause injury, severe or life threatening illness
- Pack contents: 1 respirator and 1 pair of filters
- Users must be trained and have read all user instructions. Misuse may cause injury, severe or life threatening illness
- *This product helps protect against certain organic gases and vapours (bp > 65 °C) in concentrations up to 10 x WEL or 5000 ppm (whichever is the lower) and particles in concentrations up to 20 x WEL
- Compatible with 3M Eyewear and Hearing Protection
Cartridge or Filter Type
|
A2P3 R
|
Code – 7100141611 (6502QLPRO)